Prefabricated Steel Building
Summary:
DESCRIPTION
A. Requirement. Contractor shall furnish all labor, materials
and equipment, and
perform all operations necessary to fabricate, erect and
construct a prefabricated
steel building including: all primary and secondary structural
framing members,
connection bolts, roof, louvers, roll-up and swinging
doors, flashing, fasteners,
closures, sealer, and other miscellaneous items as specified,
or required by the
contract drawings.
B. Building Details. The building width and length shall
be measured from outside
to outside face of the wall girts. The building eave height
shall be measured from
the bottom of the base channel to the intersection of
lines representing the inside
of the wall covering and the inside of the roof covering.
The roof slope shall be
four (4) inches of rise for each twelve (12) inches of
horizontal run, unless shown
or specified otherwise.
C. Type of Building. Building manufacturer must comply
with requirements of the
M.B.M.A. (Metal Building Manufacturer's Association) and
an I.C.B.O.
(International Conference of Building Officials) approved
fabricator.
Format:
Pages : 12
Size: 52 kb
Author :
Download:Prefabricated Steel Building
|
